Tired of waiting for 8 hours or more while the trickle charger that came with your RC truck does its job? The eN3 NiMH and NiCad charger works more than 8 times faster than the standard 350mAh trickle chargers that come with most RC vehicles, so you won't have to wait until tomorrow to get out and drive again.

This affordable and easy-to-use charger features charge rates ranging from 1 amp to 3 amps. Just set your charge rate, plug in your battery, and that's it! The eN3 includes a set of banana plug cables onto which you can solder the connector of your choice.

Specs
AC Input Voltage: 100-240V, 50-60HZ
Output Power: 20W
Charging Current (Selected by Switch): 1A, 2A, 3A
Battery Type (Selected by Switch): NiMH/NiCd
Battery Cell Count: 4-8S
Dimension: 2.74" x 4.33" x 1.6"
Weight: 175g

Note: This charger is intended for use with NiMH and NiCad batteries only. Using this charger with any other type of battery may result in severe damage to the charger and/or batteries and present a fire hazard.


Manual