81:1, 454RPM, 20mA (220mA stall) at 6V gives 3.17 in-oz torque.



These little gear motors measure 20.8 x 29.0 x 25.4mm (0.82 x 1.14 x 1.00") and weigh in at 4.7g (0.17oz). The square output shaft measures 3.56mm (0.14") per side, and the leads measure 5cm (1.95") long.



They're a bit funky in that they're not continuous rotation by default. They have a self-centering spring, so applying DC power will result in a 60 degree swing in one direction. Reversing power swings the output arm 60 degrees the other way. Remove the self-centering spring and clip the stops, and away you go!

                                                        

Type	Centering Pager Gearmotor
Gear Ratio	81.00:1
No Load RPM at 3V	233
No Load RPM at 6V	454
No Load Current at 3V	13mA
No Load Current at 6V	20mA
Stall Current at 3V	118mA
Stall Current at 6V	220mA
Stall Torque at 3V	2.30 in-oz
Stall Torque at 6V	3.17 in-oz
Length	14.30mm
Width	25.40mm
Height	28.80mm
Weight	5.00g (0.18oz)