This is the 1/10 scale, brushless electric powered, 2.4GHz radio controlled,
RTR HPI On-Road Sprint 2 Flux Touring Car with the 2010 Camaro Body.
**The differences between this version and the #106162**
**is that this version does not include battery or charger,**
**and has the TF-11 transmitter instead of the TF-40.**

FEATURES
Chassis: 3/16" (4mm) plastic
Drive: Four wheel belt drive
Motor: HPI Flux Vektor 5900kV brushless NOTE, motor is not 3S LiPo
compatible
Radio: 2-channel 2.4GHz, SF-10W waterproof steering servo
Electronic Speed Control: Waterproof HPI Flux Vapor, LiPo compatible
and fully prgrammable with the USB Programming Kit (not included,
order HPIC0573)
Ball Bearings: Full set, rubber sealed
Shocks: Oil-filled, plastic bodied
Differentials: Planetary gear, sealed
Transmission: Single speed with Flux optimized gearing
Tires: HPI X-Pattern Racing Tire 1.02" (26mm) width, 1.9 (49mm)
diameter
Wheels: HPI TE37 six spoke black 1.9" (48mm) diameter, 1.02" (26mm)
wide, rear wheels have 6mm offset
Pinion Gear: Steel 48 pitch
Spur Gear: 48 pitch, composite construction
Body: Polycarbonate painted and trimmed with body trim and light
details and clear plastic windows, matte black finish rear wing
Bumpers: Front, foam
Suspension: Fully adjustable, extra long upper links with new
multiple mounting positions, and adjustable droop
Ackerman: Adjustable, Ackerman describes the effect of the inner
front wheel turning faster than the outer front wheel during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bearing supported bell-crank type with servo saver

INCLUDES
HPI On-Road Sprint 2 Touring Car with the 2010 Camaro Body, Flux
Vapor ESC, Flux Vektor 5900kV brushless motor, body, wing,
4 AA TX batteries, 2.4GHz radio w/waterproof steering servo,
decal sheet, instruction manual

REQUIREMENTS
Battery: 7.2V NiMH stick pack with Deans connector
Battery Charger: Compatible with selected battery _
Misc. Items: Building and track equipment

SPECIFICATIONS
VEHICLE-
Length: 17" (431mm)
Width: 7.5" (190mm)
Height: 5" (127mm)
Weight: 2.7lbs (1245g)
Wheelbase: 10.1" (257mm)
Front Track: 7.4" (187mm)
Rear Track: 7.7" (196mm) side to side at outer edges of wheel
Front Tread: 6.3" (160mm)
Rear Tread: 6.6" (169mm) side-to-side at wheel centers
Ground Clearance: 0.35" (9mm)

BODY-
Length: 17.1" (434mm)
Width: 7.75" (197mm) at rear wheels (widest point)
6.6" (169mm) behind from wheels (thinnest point)
Height: 4.4" (111mm)